Lactaline Personal Breast Pump Set Up And Assembly Pump; Power Options; Pumpset; To Sanitize Before First Use - Ameda lactaline personal Mode D'emploi

Lactaline Personal Breast Pump
Set Up and Assembly
Pump

Power Options

AC Adapter (included)
of AC adapter is in doubt, contact an Ameda retailer to replace.
Car Adapter (not included; sold separately)
6 AA Alkaline or Rechargeable Batteries (not included)
Ci ga
te tte
Lig
ht er
the right way.
of breast pump. Gently snap into place.
When batteries are inside pump and AC adapter or car adapter
is plugged in, pump will not draw power from batteries.
Warning:
the AC or Car adapter.

Pumpset

Tubing
Tubing Adapter
4
E N G L I S H
Adapter Cap
Silicone Diaphragm
Breast Flange – 25.0 mm
White Valve
Locking Ring
Locking Disk
Milk Bottle

To Sanitize Before First Use

and then once a day.
NOTE:

Assembly

2
1
3
4. Screw bottle onto suitable size breast flange.
4
5. Push tubing adapter at end of tubing into tubing
5

Attaching to Lactaline Personal Breast Pump

ALWAYS WASH HANDS WELL WITH SOAP AND WATER BEFORE PUMPING.
Simply insert the tubing adapter into the tubing adapter port of the pump.
Single and Dual Pumping
The pumpset can be used to single or dual pump.
To single pump:
tubing adapter.
To dual pump:
attached to tubing adapter.
Do not boil or wash
tubing, adapter cap,
and tubing adapter.
www.ameda.com.
of breast flange.
of upper chamber.
of breast flange.
adapter port on pump.
Dual pumping
with one hand
gives you a
free hand.
E N G L I S H
5