Scope Of Delivery - Mesto PROFI 3275 Mode D'emploi

GB IRL
Keep bystanders away during spraying. Take precautions to prevent
hazardous substances from being misused.
Wear suitable protective clothing, goggles and respiratory protection when
working with hazardous substances.
Never spray on people, animals, electrical devices and lines, into the wind, or into
bodies of water.
Avoid ignition sources in the environment if you spray combustible liquids.
Do not leave the device in the sun. Ensure that the device is not heated
beyond the maximum operating temperature (→ Table 1). Protect the
device from frost and ammonia.
Never blow through the nozzles or valves with your mouth.
There is a risk of slipping or tripping on smooth or wet surfaces, snow, ice, on
slopes and on uneven terrain.
Repairs and modifications to the tank are not permitted.
Use only MESTO spare parts and accessories.
We cannot assume any liability resulting from the use of third-party parts.
When pumping, always observe the pressure gauge to ensure that the
recommended spraying pressure is maintained (→ Table 1 below).
After use and before maintenance work, depressurize the device.
Transport the devices in such a way that they are protected against damage and
overturning.
You will find the illustrations referred to in the text in the front fold-out pages 3 – 5 of
these instructions for use.

Scope of delivery

Tank [1] with pump [2], hose [3], instructions for use [4], spray wand [5], shut-off valve [6],
carrying strap [7]. (Fig. 1)
AUS USA
14
NZ CDN IND