Datalogger Function - Promax 10 Manuel D'utilisation

CSO & CTB INTERMODULATION PRODUCTS MEASUREMENT
(ANALOGUE CHANNELS)
CSO
Measuring frequencies
CTB

DATALOGGER FUNCTION

Max. number of loggers
Number of channels/logger
Measurements
Analogue channels
Digital channels
SCAN
Span
Reference level
TILT
Indication
Analysed band
Number of pilots
Pilots frequency
Pilots resolution
SPECTRUM ANALYSER
Span
Reference level
Analysed band
Detector
Bandwidth
Resolution
Peak detector
Span 100 MHz
Span 50 MHz
Span 30 MHz
Span 15 MHz
Span 5 MHz
Span 1 MHz
Page 4
Ratio of the peak level of the video carrier to the
peak of the distortion products of second order
beat. Measured at four frequencies user definable.
User definable from -2.50 to -0.50 MHz and from
0.50 to 2.50 MHz. (Default values -1.50, -0.50, 0.50
and 1.50 MHz).
Ratio of the peak level of the video carrier to the
peak of the distortion products of third order beat.
Measured at the carrier frequency or, approximately
mode, in a channel previously defined by the user.
55
140
Level, C/N and V/A.
Channel power and MER. (BER for data dumping to
printer or transfer to PC).
Variable: 10, 30, 100, 300 MHz and full band (from
5 to 862 MHz, according to the channel plan).
Variable from 60 to 120 dBµV in 10 dB steps.
Numerical and by level bar.
Forward (45 to 862 MHz) or Return path (5 to 100
MHz).
4 per band.
From 5 to 862 MHz.
10 kHz.
From 1 to 100 MHz (1, 5, 15, 30, 50, 100 MHz).
Variable from 60 to 120 dBµV in 10 dB steps.
Forward (45 to 862 MHz) or Return path (5 to 100
MHz).
Peak or average.
230 kHz.
900 kHz.
450 kHz.
280 kHz.
140 kHz.
50 kHz.
10 kHz.
USER'S MANUAL. PROMAX-10
04/2004