Sewing Pattern - JUKI LK-1941 Manuel D'utilisation

(. OTHERS

1. Sewing pattern

(1) Pattern input device
Pattern can be inputted by using the handy programming device, PGM-7, or PGM-20.
(2) Data ROM for sewing pattern
Data ROM System ROM
(3) Table of interchangeability of Data ROM (part) of LK-1941/42
For LK-1900
For lk-1910/20
For AMS-206
52
Dip Switch
Kind of ROM Usable/not usable
27C256
58C256
58C65
Turn OFF the power before inserting/
drawing out the ROM or changing-
over the switch.
1) Data ROM is incorporated in U32 on the MAIN
circuit board.
™ When creating a pattern with the PGM-7, confirm
that this ROM is incorporated. (The pattern which
has been created is recorded in this ROM.)
ROM part No. : HLO11940000
(EEP-ROM 58C256)
™ Write in this ROM as well when creating a pattern
with the PGM-20.
2) When using the Data ROM (EEP-ROM 58C65) for
AMS-206, turn OFF DIP switch SW1-1.
In addition, when using the presser of AMS-206,
change the setting of the memory switch No. 26 to
adjust the sewing position.
Be sure to check the setting of DIP
switch when replacing the Data ROM.
If the setting is mistaken, correct data
could not be read and E-1, E-2, or E-
8 may appear.
Not usable
Usable
Usable