JUKI LK-1941 Manuel D'utilisation page 61

(3) Setting the counter operation
Example of setting : The production counter (adding method) can be changed to the bobbin thread counter
(subtracting counter).
1) After the memory switch has started, press the
indicate " " on the display.
2) Press the key to light up the sewing LED.
3) Press the key to indicate "
Indication on A section 0 : Production counter
4) After setting, register using the
(4) Setting the pedal specifications
This function is set when changing the pedal specification is changed.
Example of setting : the standard 1-pedal specification is changed to the 2-step pedal (optional) specification.
1) After the memory switch has started, press the
indicate " " on the display.
2) Press the key to light up the sewing LED.
3) Press the key to indicate "
Indication on A section
0 : 1-pedal
1 : 2-step pedal, 2-step PK pedal
2 : PK-57
3 : 3-step pedal, 3-step PK pedal (priority to the right)
4 : 3-step pedal, 3-step PK pedal (priority to the left)
5 : 3-step pedal, 3-step PK pedal (no priority)
4) After setting, register using the
※ After setting the memory switch, turn OFF the power switch once, and turn ON again. Then, the sewing
machine starts running in accordance with the setting made by the memory switches.
or
".
1 : Bobbin thread counter
key.
or
".
key.
e
key to
e
e
key to
e
A
A
49