JUKI LK-1941 Manuel D'utilisation page 9

Precautions to be taken so as to use
the LK-1941, LK-1942 more safely
1. To avoid electrical shock hazards, neither open the cover of the electrical box for the
motor nor touch the components mounted inside the electrical box.
2. After changing the pattern, make sure the needle entry point. If the pattern is
protruded from the work clamp feet, the needle will interfere with the work clamp feet
during sewing, and it is dangerous due to the needle breakage or the like.
1. So as to prevent possible accidents caused by abrupt start of the sewing machine,
depress the start switch after ascertaining that there is no interfering thing under the
needle when winding the bobbin thread.
2. When changing the pattern, turning ON the ready switch or turning ON the work clamp
foot switch, the work clamp feet automatically come down. So, never place your
fi ngers under the work clamp feet to prevent possible accidents caused by abrupt start
of the sewing machine. During operation, be careful not to allow your fi ngers to come
close to the work clamp feet.
3. Keep your hands away from the feeding frame when turning the power off while the
sewing machine is in operation, since the feeding frame goes up at that time.
4. Be careful of handling this product so as not to pour water or oil, shock by dropping,
and the like since this product is a precision instrument.
5. This is a Class A product. In a domestic environment this product may cause radio in-
terference, in which case the user may be required to make corrective actions.
v