Operation Of The Sewing Machine (Basic); Item Data Setting - JUKI LK-1941 Manuel D'utilisation

%. OPERATION OF THE SEWING MACHINE (BASIC)

1. Item data setting

Set each item following the procedure described below.
Switch design on the control box may be different from each other in accordance with the
models.
Setting of the Setting of the X
pattern No. scale
(1) Turn ON the power switch
Pattern No. of the item selection lights up, and the pattern No. is indicated on the data display.
(2) Setting of the pattern No.
Service pattern No.
Setting of the Y
scale
Shape
□ 50x30 mm
P=3.0
P=3.0 ø30
P=3.0
P=3.5 ø30
S e w i n g c a n n o t b e
performed since this No. is
for the pattern for adjusting
the amount of oil in the hook.
(See P. 45.)
Setting of the
m a x . s e w i n g
speed limitation
1) Press the key to indicate the item "Pattern
NO".
2) Press the or
1 to 99 on the display.
In case the pattern is not prepared, indicate the service
pattern No. 51 to 53 inputted beforehand at the time of
delivery. For LK-1941, the intermediate presser is not
provided. Prepare the presser in accordance with the
sewing pattern.
Setting of the heat
cutter temperature
(For Z type only)
key to indicate Pattern No.
25