JUKI LK-1941 Manuel D'utilisation page 73

Name of Parts
Solid type work clamp foot compl.
Feed plate blank for belt
t=1.2
Feed plate guide
Feeding frame blank for belt
Wiper
Type
With knurl/Without processed
Separate type feeding frame, right/
with knurl/without processed
Separate type feeding frame, left/
with knurl/without processed
Reverse sweeping wiper
Wiper for retaining thread
Wiper base
Part No. Remarks
14437255
14444202 Knurl is coarser than that of
the normal feed plate blank
and effective for preventing
materials from slipping. In
addition, positioning of belt
can be performed by using
the feed plate guide. This is
the guide for determining the
position when sewing belt.
14444301 This guide is used as a set
SM9040603SC together with 14444202,
x2 feed plate blank for belt and
WP0450826SC feeding frame blanks for
x2 b e l t ( 1 4 4 4 4 0 0 4 a n d
14444103).
14444004 Knurl is coarser than that of
the normal feeding frame
blank and effective for
preventing materials from
slipping.
14444103
14446009 Wiper waiting position is
reverse to the normal position.
This is used when the sewing
product interferes with the
wiper. (It is necessary to
change connection in the air
piping drawing.)
14446157 This wiper lightly retains
needle thread in order to
prevent needle thread at the
start of sewing from being
caught under the presser.
14445902 Be sure to replace the wiper
base as a set when using
the reverse sweeping wiper
or the wiper for retaining
thread.
61