Maintenance And Environmental Protection; Service Instructions - Meister MTS710-1 Mode D'emploi

MW-5451520-Bedien-1610 05.10.16 08:31 Seite 35
setting can be checked by testing with a
screw. The screw is held by the magnetic
bit holder. Press the screw tip firmly up
against the material to be screwed into.
Start the screwing process until the depth
stop (7) touches the material surface and
the screw spindle automatically
decouples. To remove screws, set the
switch (5) to left (anti-clockwise) rotation
and turn the depth stop (7) back, away
from the material.
Belt holder
During breaks in work the machine can
be slung from the trouser belt by the
belt holder (1).
10 – Maintenance and
environmental
protection
Maintenance, storage, disposal
Before maintaining or servicing the
machine, always unplug it from the
power supply. Clean the machine with a
damp cloth (do not use solvents) and
dry thoroughly. Keep air vents free from
dust. Before using check the machine,
cable and accessories for damage.
Repairs must be carried out by a
specialist. Unusable machines should
be properly disposed of in accordance
with local waste-disposal regulations.
CAUTION! Electrical and battery
operated units that no longer work
should not be disposed of in the house -
hold waste! They are to be collected
separately, in accordance with the
2012/19/EU directive for
the disposal of electrical
and electronic waste, and
sent for proper and
environmentally-friendly
recycling.
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types complying
with local rules and regulations. For
details, please contact your municipal
authority concerned.
11 – Service instructions
• Store the machine, operating
instructions and where necessary the
accessories in the original packaging.
In this way you will always have all the
information and parts ready to hand.
• Meister devices are to a large extent
maintenancefree, a damp cloth being
sufficient to clean the casing. Do not
drop electrical machines in water.
Please note additional hints given in
the operating instructions.
• Meister devices are subject to stringent
quality control. If however a functional
fault shoult occur, send the device to
our servicing address. The repairs will
be carried out in a short time.
• A brief description of the defect
speeds up the faulttracing and repair
time. If within the guarantee period,
please enclose the guarantee
document and the proof of purchase.
• In so far as a repair under guarantee
is not concerned, we will charge the
repair costs to your account.
PLEASE NOTE! Opening of the
device invalidates the guarantee
claim.
IMPORTANT! We point out
expressly that in accordance
with the Product Liability Act we do
not take responsibility for any
35