Maintenance And Environmental Protection - Meister BEH 600 C Traduction Du Manuel D'utilisation Original

5410050-Elektrohob-man 21.02.14 13:58 Seite 55
Place planer sole on the workpiece with
the groove on the edge of the wood.
With both hands, feed the planer evenly
forward along the edge of the wood.
Emptying collecting bag
Risk of damage to machine from
overheating through build-up of
shavings! Empty collecting bag
regularly!
Risk of injury. Always unplug from
mains before emptying!
Grasp collecting bag by the adapter and
pull it out of the socket. Open zip fastener
and empty completely.
Using a screwdriver, carefully loosen any
wood shavings blocking the socket and
shake them out.
Close zip fastener and re-attach collecting
bag.
10 – Maintenance and
environmental protection
Maintenance
Risk of injury. Always unplug from
mains before maintenance and
cleaning!
• Before starting work: check cable and
mains plug for damage. In case of fault:
do not operate the electric planer! Have
fault repaired by approved specialist!
• While planing: empty collecting bag
regularly, every 3 to 6 minutes,
depending on the quantity of shavings
produced. To prevent overheating, do
not allow shavings to build up in the
planer!
All manuals and user guides at all-guides.com
Cleaning
After finishing work
• Using a dry brush, clean dust and chips
• Using a lightly dampened cloth, clean
electric planer! Do not use solvents!
In cases of frequent use
• wash collecting bag in warm, soapy
Repair
Replacing drive belt
drive belt!
Unscrew two bolts and remove cover.
from ventilation slots.
housing from outside and allow to dry
thoroughly.
Risk of damage to appliance!
Do not use liquids to clean the
water and dry well to maintain air
permeability.
Risk of injury. Always unplug
from mains before replacing
55