Components; Correct Use - Meister MTS710-1 Mode D'emploi

MW-5451520-Bedien-1610 05.10.16 08:31 Seite 30
of the actual conditions of use. (All
parts of the operating cycle must be
taken into account for this purpose.
This also includes times in which the
power tool is switched off and times
in which it is switched on, but is
running without load.)
CAUTION! A certain amount of
noise is unavoidable when using
this device. Ensure you carry out
noise-intensive work during permitted
times. Maintain the quiet periods and
limit your work to the absolute
minimum.
CAUTION! The effects of noise
may cause damage to the
hearing. Only ever work with suitable
ear defenders. Anybody else in the
vicinity should thus also wear ear
defenders.
3 – Components
1 Belt holder
2 Lock for continuous operation
3 On/Off switch
4 Revolution regulator
5 Right/Left directional switch
6 Bit/tool holder
7 Depth stop
8 Setting ring
4 – Correct use
Processing of self-tapping and thread-
forming screws in serial screw
connections in façade, wall and roof
construction. Only use the machines
and accessories for the intended
purposes. All other uses are expressly
excluded.
The machine is intended only for use in
30
the household.
Improper use of the product
All applications carried out with the
device that are not listed in the "Proper
use" chapter will be considered
improper use.
Uses for which the tool is not designed
may cause risks and injury. Do not use
accessories that are not intended
specifically for this electrical tool.
Tool inserts that do not fit precisely to
the sanding spindle of the electrical tool
will rotate unevenly, vibrate very heavily
and may lead to a loss of control.
There is a risk of injury. The user of the
device is liable for all property and
personal damages occurring as the
result of incorrect use.
If other components or non-original
components are used with the machine,
the manufacturer guarantee is voided.
Remaining risks:
The operating instructions for this
electrical tool contains comprehensive
tips for the safe handling of electrical
tools. However, every electrical tool has
a certain level of remaining risks which
cannot be excluded by the protective
mechanisms on the device. Only
operate electrical tools always with
necessary care.
Remaining risks may be, for example:
• Touching rotating parts or tools.
• Injury caused by flying tools or tool
parts.
• Risk of fire with insufficient ventilation
of the motor.