Roco Z21 dual BOOSTER Manuel D'utilisation page 28

Z21 Booster
®_
Many thanks for choosing a Z21
from ROCO and FLEISCHMANN!
On the following pages, we shall be providing you with all the information you need in in or-
der for you to connect the Z21
number of practical tips in this manual. Please read this manual and the warning instructions
carefully before taking the booster into operation. Despite the fact that the Z21
a very robust design, an incorrect connection or an operating error can nevertheless result in the
device suffering permanent damage.
Important information
• No guarantee will be provided for damage or malfunctions if you combine the Z21
with third-party products.
• Under no circumstances may the Z21
• Ensure that each Z21
circuit to ground can easily occur which could destroy your Z21
ponents!
• Do not use the Z21
damaged.
• Only perform connection work if the operating voltage is switched off.
• The warranty will become void if you open the Z21
• Work carefully and ensure that no short circuits occur when connecting to the track system.
An incorrect connection can destroy the digital components. Consult your specialist dealer if
necessary.
• The Z21 -Boosters may become warm when in operation. Ensure a sufficient distance between
®
the booster and neighbouring parts in order to ensure sufficient ventilation and cooling of the
device.
• Never leave your model railway system running without supervision. An unnoticed short circuit
can result in heating and represents a risk of fire.
28
28
8010806920 neu.indd 28
-Boosters to your system and use it. You shall also find a large
®
-Boosters be supplied with AC voltage.
®
-Boosters has its own power supply unit otherwise an impermissible short
®
-Boosters if the mains plug, mains cable or the device itself if defective or
®
-Boosters
®
-Boosters or other digital com-
®
-Boosters housing.
®
-Boosters is of
®
-Boosters
®
25.10.2018 13:04:26