Management Alarms; Electrical Values; Software Version - EBARA 2SP MFC 1,5T-2 Instructions Pour L'installation Et La Maintenance

10.6 MANAGEMENT ALARMS

To select the submenu Alarm management coming out of the parameters of the SET menu system, follow these steps:
- press SB6 to return to the HOME PAGE of the configuration menu .
- Press SB10 to select Alarm Management.
CONFIGURATION HOME
PAGE MENU

10.7 ELECTRICAL VALUES

To select the submenu Electrical values coming out of the parameters of the SET menu system, follow these steps:
- press SB6 to return to the HOME PAGE of the configuration menu .
- Press SB10 to select Alarm Management.
CONFIGURATION HOME
PAGE MENU

10.8 SOFTWARE VERSION

To select the submenu Software version coming out the parameters of the menu alarm management, follow these steps:
- Press SB6 to return to the HOME PAGE of the configuration menu.
- Press SB10 to select Software version.
CONFIGURATION HOME
PAGE MENU
ENGLISH
Viewing page of the configuration menu.
1: Set plant
2: Set inverter
3. Set inputs outputs
4: Managing Alarms
5: Electrical values
6: Software version
Submenu HISTORICAL AlARMS parameter
4.1 Historical alarms.
Page display of all alarms in the format:
ALARM CODE ALARM AND DESCRIPTION reported in Table 12.Axxx Descr. Al.
All alarms are displayed in descending order from newest to oldest.
The maximum number of alarms in history is 20, the oldest are deleted
using the technique of circular buffer.
Viewing page of the configuration menu.
1: Set plant
2: Set inverter
3. Set inputs outputs
4: Managing Alarms
5: Electrical values
6: Software version
Submenu ELECTRICAL VALUES parameter
5.1 Electrical values
Page displaying the electrical values of the system.
V = panel supply voltage.
I = total current supplied to the pumps
P = total power consumed by pumps (calculated with a 0.77 constant power factor)
E = pumps energy consumed meter (resetting the working hours of all pumps of the system even
the counting of the energy is cleared)
Viewing page of the configuration menu.
1: Set plant
2: Set inverter
3. Set inputs outputs
4: Managing Alarms
5: Electrical values
6: Software version
Release s.w. 16.008.02.5-2
48