References Control Panel And Internal Components - EBARA 2SP MFC 1,5T-2 Instructions Pour L'installation Et La Maintenance

9. REFERENCES CONTROL PANEL AND INTERNAL COMPONENTS

REF.
LL1
Amber warning light indicating panel fed.
LL2
Red warning light indicating alarms.
!
LL3
Green warning light indicating electropump one running.
LL4
Green warning light indicating electropump two running.
Green warning light indicating electropump three running.
LL5
LL6
Red warning light indicating thermal block of electropump one.
- blinking light for the first three interventions, fixed light at the fourth intervention.
LL7
Red warning light indicating thermal block of electropump two.
- blinking light for the first three interventions, fixed light at the fourth intervention.
LL8
Red warning light indicating thermal block of electropump three.
- blinking light for the first three interventions, fixed light at the fourth intervention.
Button for selecting panel operation with:
LL9
SB1
LL10
Button for selecting operation of electropump one in:
LL3A
SB2
Button for selecting operation of electropump two in:
LL4A
SB3
Button for selecting operation of electropump three in:
LL5A
SB3A
Button for selecting electropump one in:
LL6A
SB4
Button for selecting electropump two in:
LL7A
SB5
Button for selecting electropump three in:
LL8A
SB5A
SB6
Button with double functions:
- To return to the HOME PAGE MONITOR.
1
- To see the page up, the group of under parameters of the HOME PAGE MENU '.
SB7
Button with double functions:
- To return to the HOME PAGE MONITOR.
1
- To see the page down, the group of under parameters of the HOME PAGE MENU '.
- INVERTER: yellow led LL9 lit.
- SYSTEM EXCLUDED: leds LL9 off and control panel programming enable
- PRESSURE SWITCH: yellow led LL10 lit: ATT.
- AUTO: yellow led LL3A lit: the electropump is started by the control board.
- MAN: yellow led LL3A lit: the electropump is started by holding down the key for more than 5
seconds. When the key is released, the electropump stops and the led LL3A switch off.
- AUTO: yellow led LL4A lit: the electropump is started by the control board.
- MAN: yellow led LL4A lit: the electropump is started by holding down the key for more than 5
seconds. When the key is released, the electropump stops and the led LL4A switch off.
- AUTO: yellow led LL5A lit: the electropump is started by the control board.
- MAN: yellow led LL5A lit: the electropump is started by holding down the key for more than 5
seconds. When the key is released, the electropump stops and the led LL5A switch off.
- STOP: yellow led LL6A lit: all electropump operation is excluded.
- RESET: yellow led LL6A blinking: holding down the key for more
than 5 seconds starts the reset process of the alarms that intervened in electropump one.
- STOP: yellow led LL7A lit: all electropump operation is excluded.
- RESET: yellow led LL7A blinking: holding down the key for more
than 5 seconds starts the reset process of the alarms that intervened in electropump two.
- STOP: yellow led LL8A lit: all electropump operation is excluded.
- RESET: yellow led LL8A blinking: holding down the key for more
than 5 seconds starts the reset process of the alarms that intervened in electropump three.
ENGLISH
FUNCTION
36