Checking Chain Lubrication; Coasting Brake - Stihl MSE 250 C Notice D'emploi

English
Checking Oil Level
1
Check the oil level regularly during
N
operation.
Top up the oil tank when the oil level
N
reaches the "min" mark (1) or
earlier.
If the oil level in the tank does not go
down, the reason may be a fault in the oil
supply system: Check chain lubrication,
clean the oilways, contact your dealer
for assistance if necessary STIHL
recommends that you have servicing
and repair work carried out exclusively
by an authorized STIHL servicing
dealer.
22

Checking Chain Lubrication

The saw chain must always throw off a
small amount of oil.
NOTICE
Never operate your saw without chain
lubrication. If the chain runs dry, the
whole cutting attachment will be
irretrievably damaged within a very short
time. Always check chain lubrication and
the oil level in the tank before starting
work.
Every new chain has to be broken in for
about 2 to 3 minutes.
After breaking in the chain, check chain
tension and adjust if necessary – see
"Checking Chain Tension".

Coasting Brake

The coasting brake brings the running
chain to a standstill when you let go of
the trigger switch.
1 Coasting brake off
2 Coasting brake activated
1
2
MSE 250 C