Agilent Technologies TV 801 Navigator Bolted Flange Notice De Mode D'emploi page 222

17 Technical Information
J1 - In-Out
Figure 12
The set point output stays at 0 Vdc until the frequency becomes
higher than 505 Hz (that is 500 Hz + 1% of 500 Hz), then the output
goes at 24 Vdc and stays at 24 Vdc until the frequency becomes lower
than 495 Hz (that is 500 Hz – 1% of 500 Hz).
It is possible to delay the set point checking for a programmable
delay time.
The PROGRAMMABLE SET POINT signal has the following default
settings:
The Navigator Software (optional) allows the operator to set all the
NOTE
programmable feature.
When no external input-output device is available this connector
must be closed with the supplied mating connector that short-circuits
the START and INTERLOCK inputs with the GROUND and 24 Vdc
OUT (see the following figure).
222/248
reference quantity: frequency
thereshold: 582 Hz
hysteresis: 2 %
activation type: high level
delay time: 0 second
TV 801 Navigator Bolted Flange User Manual / 87-900-980-01 (D)