Preparation For Installation - Agilent Technologies TV 801 Navigator Bolted Flange Notice De Mode D'emploi

If for any reason the shelf life time is exceeded, the pump has to be returned to
CAUTION!
the factory. Please contact the local Agilent Vacuum Sales and Service
representative for informations.

Preparation for Installation

The TV 801 Navigator Bolted Flange is supplied in a special
protective packing. If this shows signs of damage which may have
occurred during transport, contact your local sales office. When
unpacking the system, be sure not to drop it and avoid any kind of
sudden impact or shock vibration to it.
Do not dispose of the packing materials in an unauthorized manner.
The material is 100% recyclable and complies with EEC Directive
85/399.
In order to prevent outgassing problems, do not use bare hands to handle
CAUTION!
components which will be exposed to vacuum. Always use gloves or other
appropriate protection.
Normal exposure to the environment cannot damage the TV 801 Navigator
NOTE
Bolted Flange. Nevertheless, it is advisable to keep it closed until it is installed
in the system, thus preventing any form of pollution by dust.
TV 801 Navigator Bolted Flange User Manual / 87-900-980-01
Instructions for Use

Preparation for Installation

(D)
16
199/248