How To Link Bridge Induction Zones; Setting The Cooking Timer /Alarm - ETNA AKI586ZT Mode D'emploi

OPERATION

How to link Bridge induction zones

1. Put the hob in standby mode.
2. Touch both right cooking zone keys simultaneously to link the Bridge zones.
3. On one of the two linked Bridge zones the symbol (8) appears in the display.
4. Touch the minus (-) or plus (+) key to set a power level (for both linked zones) on the other
Bridge zone.
5. Tip: The Bridge function can only be activated on the two zones on the right. If the Bridge
function is on, only one booster can be on, and only on the cooking zones that are not in
Bride mode.
Deactivating the link mode
1. Touch both Bridge cooking zone keys simultaneously to stop the link of the Bridge zones.

Setting the cooking timer /alarm

1. Start the hob.
▷ For use as a cooking timer; select a cooking zone and power level.
▷ For use as an alarm; do not select a cooking zone and power level.
▷ See chapter: Cooking-timer/alarm
2. Touch the minus (-) and plus (+) key simultaneously to switch on the timer.
▷ The timer's display shows double zero (00).
▷ A flashing point appears in the cooking zone display.
3. Touch within 10 seconds the minus (-) or plus (+) key to select a cooking time.
EN 16