How To Link Bridge Cooking Zones; Special Cooking Functions; Switch Off A Cooking Zone - ETNA KI160ZT Mode D'emploi

OPERATION

How to link Bridge cooking zones

1. Switch on the hob.
2. Touch both left Bridge cooking zone selection keys simultaneously for approximately
2 seconds to link the bridge zones until you hear a double audio signal.
In the left displays appear flashing Bridge symbols. The symbols are flashing alternately
▷
with the power level.
3. Touch the plus (+) or minus (-) key to set a power level (for both linked zones).
Deactivating the 'bridge' mode
1. Touch both left Bridge cooking zone selection keys simultaneously to deactivate the bridge
function.
Special cooking functions (only for type KIF260ZT)
1. Touch the front right or rear right cooking zone selection key a number of times to select the

special cooking functions:

Touch the key twice to select the cooking function;
▷
Touch the key three times to select the baking function;
▷
Touch the key four times to select the reheat function;
▷
Touch the key five times to select the melting chocolate function.
▷
• The special cooking functions are only available on both right cooking zones.
• The cooking and baking function can not be selected at the same time.

Switch off a cooking zone

1. Select an cooking zone and touch the minus (-) key to set the power level to zero (0) or use
the On/off key to switch off the hob.
EN 17