ETNA AKI586ZT Mode D'emploi page 93

OPERATION
Adjust the cooking power levels
1. Touch the cooking zone key.
▷ The power level lights up.
2. Touch the minus (-) or plus (+) key to change the power level.
Stop a cooking zone
Only one cooking zone operating.
1. Touch the cooking zone key.
2. Touch the minus (-) key to set the power level to zero (0).
The cooking zone stops.
▷
▷ The hob stops after a few seconds when all cooking zones are set to Zero (0) and no
other functions are in use.
Stop all cooking zones at the same time
One or more cooking zones operate.
1. Touch and hold the On/Off key.
▷ All displays go Off and the hob stops.
The main display and cooking zone(s) display(s) will switch off. The induction hob is now
powered off. The residual heat indicator, displayed as a H on each cooking zone, will remain lit
until these zones have sufficiently cooled down.
WARNING: Risk of burns.
Do not touch a cooking zone for which the indicator (H) appears.
If a cooking zone remains lit for too long at the same power level, the appliance will automatically
switch it off, and the residual heat indicator H will appear. Switch it back on to reset the cooking
zone's operation.
EN 15