How To Link Bridge Induction Zones - ETNA KIF577ZT Mode D'emploi

OPERATION
Checking remaining cooking time
The timer display shows the first finished timer setting.
An illuminated point next to the power level indicates that the cooking zone is
▷
linked to a timer.
1. Touch the slider from the cooking zone of which you want to adjust the timer.
The illuminated point next to the power level flashes.
▷
The remaining cooking time is visible in the timer display.
▷
Turning timer off
If you want to switch off the timer prior the end of preset time:
1. Touch the slider from the cooking zone of which you want to switch off the timer.
▷ The illuminated point and the power level flashes.
2. Touch simultaneously the plus '+' and minus '-' timer key.
The illuminated point next to the power level goes out.
▷
▷ The timer display will show '--'.

How to link Bridge induction zones

1. Switch on the hob.
2. Touch the link key for Bridge cooking zones to link the bridge zones.
In the left rear display appears the Bridge zone link symbol.
▷
3. Touch the left front cooking slider to set a power level (for both linked zones).
Deactivating the 'Bridge zone link' mode
1. Touch the link key for Bridge cooking zones.
2. Touch the left front cooking slider to set a power level to zero (0).
EN 17