ETNA AKI586ZT Mode D'emploi page 95

OPERATION
4. The timer has been set.
▷ The cooking zone will stop after the set time has passed.
An audio signal will sound for 2 minutes.
▷
▷ Press the plus (+) or minus (-) key to stop the alarm.
Changing pre-set cooking time
Cooking time can be changed anytime during the operation.
1. Touch the cooking zone key to select the zone of which you want to adjust the timer.
A flashing point identifies the zone.
▷
2. Touch the plus (+) or minus (-) key to change the time.
Checking remaining cooking time
The timer display shows all timer settings. The different timer settings are shown in the display in
turn.
1. Touch simultaneously plus (+) and minus (-) key to select the zone of which you want to see the
remaining time.
▷ A flashing point identifies the zone.
▷ The timer will display the remaining time of the selected cooking zone.
Turning timer off
If you want to switch off the timer prior the end of pre-set time:
1. Touch the cooking zone key to select the zone of which you want to stop the timer.
2. Touch the minus (-) and plus (+) key simultaneously.
3. Touch the minus (-) key to set the time to double zero (00).
The illuminated point adjacent to the display stops flashing.
▷
EN 17