Pfaff BETA BGV C1 Mode D'emploi page 37

Electric wire rope winch >BETA II< BGV C1
English
for stages and studios
6.3 Explanation to drive groups FEM 9.511 for rope drives
The electric wire rope winches are classified according to different drive groups, DIN 15020, FEM 9.511,
ISO4301/1 (see tech. data, page 23)
Those drive groups refer to the rope drive and all mechanical parts of the winch.
It determines the period of time of safe operation depending on load collective.
running
time
medium running time per day in hour,
category
no.
Term
1 light
load
collec-
2 medium
tive
3 heavy
very
4
heavy
6.4 Calculated operating times acc. to FEM 9.755
DIN 15020/1 FEM 9.511
ISO 4308/1; SO 4301/1
Load collective
line
factor of the load spectrum
light 1 - L1
k = 0,5
1
(km 1 = 0,125 = 0,5
medium 2 - L2
0,5 < k < 0,63
2
(km 1 = 0,25 = 0,63
heavy 3 - L3
3 0,63 < k < 0,8
(km 1 = 0,5 = 0,8
very heavy 4- L4
0,8 < k < 1,0
4
(km 1 = 1 = 1,0
*) not included in FEM 9.511
Apart from drive groups, the rope has to be checked and serviced regularly according to
DIN15020, if necessary, replace.
By comparing those data with the actual operating conditions and times the consumed part of the calculated
operating time can be determined
The consumed part of the calculated operation has to be recorded by the operator (i.e. writing,
counting, measuring)
After expire of the calculated working life the winch has to be given a thorough examination
1)
only by manufacturer or competent personnel authorised by manufacturer
technische Änderungen vorbehalten
Symbol
related to one year
Explanation
exceptionally maximum load,
continuously very small loads
k < 0,50
often maximum load, but con-
tinuously small loads
0,50 < k < 0,63
frequent maximum load, con-
tinuously average loads
0,63 < k < 0,80
continuously maximum load
and adjacent loads
0,80 < k < 1,00
Drive group
1E m *
(400) * 800
3
)
(200) * 400
3
)
(100) * 200
3
)
(50) *
3
)
design changes under reserve
04.01.411
V V V
006 012 025
≤ 0,12 ≤ 0,25 ≤ 0,5 ≤ 1
acc. to FEM9.511, DIN15020, ISO4301
1 E m* 1 E m* 1 D m 1 C m 1 B m 1 A m 2 m
1 E m* 1 D m 1 C m 1 B m 1 A m 2 m
1 D m 1 C m 1 B m 1 A m 2 m
1 C m 1 B m 1 A m 2 m
1D m 1C m 1B m 1A m
M 1 M 2 M 3 M 4
calculated operation time D (h)
1600 3200 6300 12500 25000 50000 100000
800 1600 3200
400 800 1600
100 200 400 800
changements techniques sous réserve
V V V V
05 1 2 3
≤ 2 ≤ 4 ≤ 8 ≤ 16 ≥ 16
Drive group
3 m
3 m 4 m
3 m 4 m 5 m
2 m 3 m 4 m
M 5 M 6 M 7
6300 12500 25000
3200 6300 12500
1600 3200 6300
Seite / page 36
V V
4 5
3 m 4 m
4 m 5 m
5 m
5 m
M 8
50000
25000
12500
1)