Fastening The Controller On Mounting Plate - Lenze 9300 vector Instructions De Montage

4.3

Fastening the controller on mounting plate

}
Danger!
Risk of injury due to the high weight of the controller.
The controller has to be carried using the eyebolts and an adequate lifting tool.

0
1
3
Fig.4−3
1. Put master and slave on the mounting plate.
2. Fasten the master and slave each with five hexagon socket screws and spring
washers at the top and 3 hexagon socket screws and spring washers at the bottom
exactly at the marked point.
EDKVF9383 DE/EN/FR 4.0
Fastening the controller on mounting plate
‚
0
2
Fastening the controller on mounting plate
0
Eyebolts
1
Master
2
Slave
l
Mechanical installation
4
5
5
4
3
Mounting plate
4
16 hexagon socket screws M8 × 25 mm
5
16 spring washers M8
4
9300vec081
79