Wiring Of The Feedback System; Important Notes - Lenze 9300 vector Instructions De Montage

5 Electrical installation

Wiring of the feedback system

Important notes

5.8 Wiring of the feedback system
5.8.1 Important notes
An incremental encoder can be connected to input X8 or input X9:
ƒ
– Incremental encoders with TTL level are connected to X8.
– Incremental encoders with HTL level are connected to X9.
The incremental encoder signal can be output for slave drives at the digital
ƒ
frequency output X10.
)
Note!
ƒ
ƒ
104
We recommend to use Lenze system cables for wiring.
For self−made cables only use cables with shielded cores twisted in pairs.
l
EDKVF9383 DE/EN/FR 4.0