Fasten The Controller On Mounting Plate - Lenze 9300 vector Instructions De Montage

Show/Hide Bookmarks
3.3

Fasten the controller on mounting plate


0
1
Fig.8-3
1. Put master and slave on the mounting plate.
2. Fasten the master and slave each with five hexagon socket screws and spring
EDKVF9383 DE/EN/FR 1.0
Danger!
Risk of injury due to the high weight of the controller.
The controller has to be carried using the eyebolts and an adequate lifting tool.
0
2
3
Fasten controller on mounting plate
Eyebolts
Master
Slave
washers at the top and 3 hexagon socket screws and spring washers at the bottom
exactly at the marked point.
Mechanical installation
Fasten the controller on mounting plate
‚
4
5
5
4
Mounting plate
16 hexagon socket screws M8 × 25 mm
16 spring washers M8
3
9300vec081
59