Modifying The Machine - Orved VGP25N Mode D'emploi Et D'entretien

HAZARDS DERIVING FROM GAS USED
DANGER!
• Use only nitrogen (N2), carbon dioxide (CO
• Risk of explosion! Do not use oxygen (O
other explosive or flammable gases.
• Strictly comply with the gas manufacturer's instructions for proper use of the gas cylinders and gas pressure reducers!
HAZARDS DERIVING FROM THE PRESENCE OF HEATING ELEMENTS
(SEALING PLATE)
DANGER!
• Risk of scalding: do not touch the sealing plate.
MACHINE MAINTENANCE, SERVICE AND REPAIRS
!
DANGER
• Remove the plug from the socket before each intervention.
• Perform all machine maintenance and servicing as scheduled.
• Any damage must only be repaired by qualified personnel.

MODIFYING THE MACHINE

DANGER!
• Do not alter the machine in any way without approval from ORVED S.p.A.
• Immediately replace all deteriorated, worn or damaged parts (qualified personnel must replace these
parts).
• Only original spare parts are to be used.
FIRE PREVENTION
DANGER
!
• Keep the vents free from obstacles (at least 10 cm away from any surrounding obstacle).
• Do not place the machine close to flammable products.
DANGER!
• Risk of burns: ventilate the environment if alcohol-based or flammable disinfectants are used.
Keep open flames away from the machine! Do not smoke!
4
), nitrogen and carbon dioxide mixtures (N
2
), other explosive or flammable gases, gas mixtures containing oxygen (O
2
Rev. 08 - 04/2017 - Cod. 1500160 - Instruction manual VGP25N / VGP60N
-CO ) or other inert gas mixtures.
2 2
) or
2