Hazards Deriving From Gas Springs Fitted On The Sealing Head; Hazards Deriving From Gas; Hazards Deriving From The Presence Of Heating Elements (Sealing Plate); Machine Maintenance, Service And Repairs - Orved VGP25N Mode D'emploi Et D'entretien

• Only qualified personnel can operate on the power supply system and access live parts.
• Perform regular inspections of the electrical system of the machine (these are only to be performed by qualified per-
sonnel).
• Remove and/or immediately replace loose connections or burnt wires (only qualified personnel must replace these
parts).
• Replace the power supply cable if damaged. Only qualified personnel must replace this part.
• Use only suitable plugs and sockets that comply with the electrical specifications stipulated on the identification plate
of the machine.
• Do not insert objects in the vents of the machine: risk of electric shock!
• It is strictly prohibited to use running water, water jets and/or vapour in the machine installation area: risk of electric
shock!

2.4.5 HAZARDS DERIVING FROM GAS SPRINGS FITTED ON THE SEALING HEAD

DANGER!
• Do not open, cut or damage the gas springs. These devices are loaded at a pressure of about 180 bar.
• The gas springs must be discharged before disposing of the machine. Request instructions regarding disposal.
2.4.6 HAZARDS DERIVING FROM GAS USED
DANGER!
• Use only nitrogen (N ), carbon dioxide (CO
2
• Risk of explosion! Do not use oxygen (O
other explosive or flammable gases.
• Strictly comply with the gas manufacturer's instructions for proper use of the gas cylinders and gas pressure reducers!

2.4.7 HAZARDS DERIVING FROM THE PRESENCE OF HEATING ELEMENTS (SEALING PLATE)

DANGER!
• Risk of scalding: do not touch the sealing plate.

2.4.8 MACHINE MAINTENANCE, SERVICE AND REPAIRS

DANGER!
• Remove the plug from the socket before each intervention.
• Perform all machine maintenance and servicing as scheduled.
• Any damage must only be repaired by qualified personnel.
Rev. 08 - 04/2017 - Cod. 1500160 - Instruction manual VGP25N / VGP60N
GENERAL SAFETY STANDARDS AND ACCIDENT PREVENTION
), nitrogen and carbon dioxide mixtures (N
2
), other explosive or flammable gases, gas mixtures containing oxygen (O
2
-CO ) or other inert gas mixtures.
2 2
) or
2
13