Safety Precautions And Warnings; Personnel Assigned To Use The Machine; Protection And Safety Devices - Orved VGP25N Mode D'emploi Et D'entretien

SAFETY PRECAUTIONS AND WARNINGS

• Before use, make sure the machine is intact and bears no signs of damage.
• If the machine is not used for a long period of time, it must be switched off from the main switch.
• Prevent unauthorised persons from accessing the work area.
• Use suitable work clothes and protection gloves.
• Never use the machine in potentially explosive environments, or in the presence of flammable vapours
and gas.
• Make sure there is sufficient ventilation in the workplace.
• Immediately remove all obstacles and interference that can compromise safety.

PERSONNEL ASSIGNED TO USE THE MACHINE

DANGER!
• Only trained personnel can use the machine. Such personnel must be aware of the safety
Standards and User Instructions contained in this manual.
• This machine is not suitable for use by persons (including children) with reduced physical,
sensory and mental capacities, or unskilled persons, unless they are supervised and trained
regarding use of the machine by a person responsible for their safety. Make sure that children
do not play with the machine.

PROTECTION AND SAFETY DEVICES

DANGER!
• Before every machine start-up, check that all the protection and safety devices are pre-
sent, efficient and functional.
ELECTRICAL RISkS
ELECTRICAL HAZARD
• The electrical safety of the machine is only guaranteed when it is connected correctly to an efficient
earthing system in accordance with the law.
• Only qualified personnel can operate on the power supply system and access live parts.
• Perform regular inspections of the electrical system of the machine (these are only to be performed
by qualified personnel).
• Remove and/or immediately replace loose connections or burnt wires (only qualified personnel must
replace these parts).
• Replace the power supply cable if damaged. Only qualified personnel must replace this part.
• Use only suitable plugs and sockets that comply with the electrical specifications stipulated on the
identification plate of the machine.
• Do not insert objects in the vents of the machine: risk of electric shock!
• It is strictly prohibited to use running water, water jets and/or vapour in the machine installation area:
risk of electric shock!
Rev. 08 - 04/2017 - Cod. 1500160 - Instruction manual VGP25N / VGP60N
3