Programs; Manual Mode; Beginner Mode - Tunturi Pure Cross R 4.1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Programs

Power on the display or use reset key
function to go to main menu.
Press Up key or Down Key to select
workout program.
Available programs are: Quick start,
Manual, beginner, Advance, Sporty,
Cardio and Watt program.

Manual mode

For Quick start you can
Press Start/ stop key to start workout
without any preset setting..
During workout you can press Up/ Down
key to adjust resistance level.
Quick start mode stops when, no input
for longer than 4 minutes or when Start/
stop key is pressed.
When settings in manual mode are
required than you;
Press Up/ Down key to select
workout program, choose Manual
mode and press mode key to enter
next setting entry for manual mode
program.
Press Up/ Down key to preset
training time, and press Mode key to
confirm the setting.
After confirm you can set also (also):
distance, Calories, and Pulse.
Note:
When setting more than one goal, the
training will end at first achieved goal.
Leave a goal blank and it will not be
seen as a preset limit.
Press Start/ Stop key to start workout
Press Up/ Down key to adjust
resistance level
Press Start/ stop key to pause
workout.
Press Reset key to return to main
menu. (active training data will be
lost)
Owner's manual • Pure 4.1

Beginner mode

Press Up/ Down key to select
workout program, choose beginner
mode and press Mode key to enter
next setting menu for beginner mode.
There can be 4 beginner modes
selected: beginner 1, beginner 2,
beginner 3, and beginner 4. Select
one by using the Up/ Down key and
confirm selected by pressing Mode
key.
Press Up/ Down key to preset
training time, and press Mode key to
confirm the setting.
After confirm you can set also (also):
distance, Calories, and Pulse.
Note:
When setting more than one goal, the
training will end at first achieved goal.
Leave a goal blank and it will not be
seen as a preset limit.
Press Start/ Stop key to start workout
Press Up/ Down key to adjust
resistance level
Press Start/ stop key to pause
workout.
Press Reset key to return to main
menu. (active training data will be
lost)
GB
11

Publicité

Table des Matières
loading

Table des Matières