Tunturi Pure Cross R 4.1 Mode D'emploi page 7

Assembly step E
• Fix pedal tube to lower arms as
shown in picture.
Assembly step F
• Fix upper moving handle bars as
shown in picture.
Assembly step G
Owner's manual • Pure 4.1
• Fix both foot rests to the pedal tubes
as shown in picture.
Remark:
There are two horizontal positions you
can fix the foot rests too. Make sure you
use same fittings for left and right foot
rest always.
Assembly step H
• Fix both fixed handle bar tubes as
shown in picture.
Remark:
First put all screws/ bolts in correct place
before tightening them fully.
Assembly step I
• Fix the console bracket to the upright
tube
• Guide the hand pulse wires coming
from the handlebar and data cable
coming form upright tube through the
console bracket hole.
GB
7