Agilent Technologies TV 301 Mode D'emploi page 271

Then fix the two flanges with the clamps as shown in the figure.
Figure 54
For ConFlat flange connections we recommend using Agilent
hardware.
To facilitate assembly and dismantling, apply Felpro C-100 high
temperature lubricant to the screw threads protruding from the
flange and between the nuts and flange.
Attach the units and tighten each one in turn. Repeat the sequential
tightening until the flange faces meet.
Exercise care when tightening nuts and bolts to avoid creating dents in the
CAUTION!
envelope as this may cause the pump rotor to lock.
TV 301 Navigator User Manual / 87-900-946-01 (N)
Technical Information
TV 301Controller Installation
17
271/284