Ag Rack Controller Compatible Vent Valve Mod - Agilent Technologies TV 301 Mode D'emploi

17 Technical Information
Vent Accessories
Then screw the vent valve into the pump and tighten it using a 16
mm hexagonal spanner with a torque of 2.5 Nm.
Figure 44
Do not overtighten the valve as this may damage the thread on the pump.
CAUTION!
Then connect the cable from the valve to the suitable connector on
the controller (see the preceding paragraph "INTERCONNECTIONS").
TV-301 AG Rack Controller Compatible Vent Valve
mod. 9699844
Figure 45
264/284 TV 301 Navigator User Manual / 87-900-946-01 (N)