Vibration Isolator Installation; Purge Valve Installation - Agilent Technologies TV 301 Mode D'emploi

17 Technical Information

Vibration Isolator Installation

Vibration Isolator Installation

Four vibration isolators for ISO and CFF inlet flange version pumps
are available as accessories.
The four model part numbers are the following:




They typically reduce the vibration transmitted from the TV 301
Navigator to the system by a factor of 20.
Please refer to the relevant instruction manual.

Purge Valve Installation

A gas purge valve is available to protect the pump bearings against
particulate and corrosive gases that could move into the pump. To
install the gas purge valve it is necessary to unscrew the purge port
cover as shown in the following figure,
Figure 48
266/284
model 9699344 for ISO 100 flange;
model 9699345 for ISO 160 flange;
model 9699334 for CFF 6" flange;
model 9699335 for CFF 8" flange.
TV 301 Navigator User Manual / 87-900-946-01 (N)