Installation - Agilent Technologies TV 301 Mode D'emploi

Table des Matières

Publicité

16
Instructions for Use

Installation

Installation

Do not remove the adhesive and protective cap before connecting the turbopump
CAUTION!
to the system.
Figure 2
Do not install or use the pump in an environment exposed to
atmospheric agents (rain, snow, ice), dust, aggressive gases, or in
explosive environments or those with a high fire risk.
During operation, the following environmental conditions must be
respected:
In the presence of magnetic fields the pump must be protected using
a ferromagnetic shield. See the appendix "Technical Information" for
detailed information.
The TV 301 Navigator must be connected to a primary pump (see
"Technical Information").
212/284
maximum pressure: 2 bar above atmospheric pressure
temperature: from +5 °C to +35 °C (see the diagram pressure-
temperature in the appendix "Technical Information")
relative humidity: 0 - 95% (non-condensing)
TV 301 Navigator User Manual / 87-900-946-01 (N)

Publicité

Table des Matières
loading

Table des Matières