Input Power Connection On The Model 9698972; Rs 232/Rs 485 Communication Description - Agilent Technologies TV 301 Mode D'emploi

Input power connection on the model 9698972

The following figure shows the input power connection relevant to
the model n. 9698972.
Figure 26
In order to avoid damage to the connector all the pins must be connected to the
CAUTION!
external power source.

RS 232/RS 485 communication description

Both the RS 232 and the RS 485 interfaces are available on the
connector J6.
The communication protocol is the same (see the structure below),
but only the RS 485 manages the address field. Therefore to enable
the RS 485 is necessary to select the type of communication as well
as the device address by means of the Navigator software.
Communication Format


TV 301 Navigator User Manual / 87-900-946-01 (N)
8 data bit
no parity

Input power connection on the model 9698972

Technical Information
243/284
17