How To Set The Cloth - JUKI MEB-3200 Manuel D'utilisation

Threading the machine with gimp
S and
R types
J, C type

(4) How to set the cloth

1) Enter the sewing material until it comes in contact with cloth patches
2) Loosen setscrews
12
Pass gimp through the groove
on the thread tension disk shaft.
＊ S type
＊ J, C and T types : 10.0 to 26 mm
, right and left and adjust the sewing position by moving the cloth patches to and fro.
T type is without gimp.
＊
In case of thin thread, insert gimp
in the gimp presser plate.
: 13.5 to 30 mm
, right and left.
＊