Descaling - Franke SAPHIRA Mode D'emploi

19.

Descaling

The Unit has an integrated descaling program. The procedure takes about 40 minutes.
F
Once started, the descaling procedure may not be stopped.
If a fixed water connection is mounted on the watertank, remove and switch it off
according to the attached page in the operating manual of the fixed water connection.
I
When acid-containing descalers are used, immediately remove any splashes and drops on
sensitive surfaces, in particular natural stone and wood surfaces, or take the appropriate
precautions.
§
Switch off your Unit at the ON/OFF button (23).
§
Press the button Descale (31) until an acoustic signal is heard.
§
Display:
§
Display:
§
Display:
Dissolve 3 descaling tablets completely in 0.7 litre of water in a vessel and introduce the mixture
into the empty water tank.
Wird anstelle der Entkalkungstablette der Franke Flüssigentkalker verwendet, füllen Sie den
ganzen Flascheninhalt des Franke Flüssigentkalkers unverdünnt in den leeren Wassertank.
I
Place a sufficiently large vessel under the pivotable delivery tube (17) and the coffee delivery
(4).
§
Press the button Descale (31)
§
Display:
§
Display:
§
An acoustic signal is heard.
§
Display:
§
Display:
§
Display:
§
Press the button Descale (31)
§
The descaling works
§
Display:
§
Display:
§
An acoustic signal is heard.
§
Display:
§
Display:
Instruction for use Saphira
EMPTY
DRIP TRAY
INSERT AGENT
IN TANK
PRESS
DECALCIFYING
UNIT
DECALCIFYING
PLEASE
WAIT
EMPTY
DRIP TRAY
FILL
WATER TANK
PRESS
DECALCIFYING
UNIT
DESCALCIFYING
PLEASE
WAIT
EMPTY
DRIP TRAY
CLEAN
CONTACTS
(Fig.2)
(Fig.2)
(Section 17.10 / Fig.8).
Page 52 18.06.04 / Rev D / Maks 4 / PPB