Programming; Programming The Grinding Quantity - Franke SAPHIRA Mode D'emploi

16.

Programming

The following functions can be programmed:
a Coffee quantity
a Temperature
a Water quantity
a Milk quantity
a Hot water portion
a Water hardness
a Time
a Unit on
a Unit off
a Audit trail
a Language
To enter the programming level, the following steps must first be carried out:
§
Switch your Unit on with the ON/OFF button (23).
§
Press the PROG. button (26) until an acoustic signal is heard.
§
Display:
§
Display:
16.1.

Programming the grinding quantity

§
Display:
§
Display:
§
§
Press the desired product button.
§
Display
§
You can determine the grinding quantity by pressing the + (27) or – (28) button.
§
To save the setting, press the PROG. button (26).
§
Display:
The programmed amount of coffee can be distributed to the left and right grinder per percentage;
F
Expl.: Adjust. <100% >0%
Adjust. <0%
Adjust. <25%
Adjust. <75%
§
You can adjust the values by pressing the + (27) or – (28) button.
§
To save the setting, press the PROG. button (26).
§
Display:
§
Display:
§
Press another product button, the + button (27) to reach the next function or the EXIT button (30) to
exit the programming.
Instruction for use Saphira
ADJUST
COFFEE QTY.
SELECT
PRODUCT
ADJUST
COFFEE QTY.
SELECT
PRODUCT
: (Selected product)
- ..............II..............+
(Selected product)
: 100% : 0%
programmed amount of coffee is made through left grinder
>100% programmed amount of coffee is made through right grinder
>70% programmed amount of coffee is made 25% through left grinder
and 75% through right grinder (mix)
>25% programmed amount of coffee is made 75% through left grinder
and 25% through right grinder (mix)
ADJUST
COFFEE QTY.
SELECT
PRODUCT
Page 44 18.06.04 / Rev D / Maks 4 / PPB