Empty Drip Tray; Problems - Franke SAPHIRA Mode D'emploi

Display
DRIP TRAY MISSING

EMPTY DRIP TRAY

CLEAN UNIT
DESCALCIFYING
NECESSARY
MALFUNCTION
24.

Problems

Problems
During coffee delivery,
the coffee flows only drop
by drop
Coffee flow is stopped after - Insufficient powder in
prebrew
Very loud noise from the
grinder
Insufficient foam when
foaming milk
If it is still not possible to eliminate the messages and problems, please contact your Customer Service
or Franke AG directly.
Instruction for use Saphira
Cause
- The tray is not snapped in
correctly
- The residual water tray is
full
- The display does not go out
in spite of the tray having been
emptied
- 220 deliveries or 180 washes
have been performed
- The display does not go
in spite of cleaning
having been performed
- The Unit must be
descaled
- The display does not go
out in spite of descaling
having been carried out
- Various causes
Cause
- Powder too fine
system
- Stone in the grinder
- Cappuccino blocked
Page 54
Remedy
- Insert tray correctly
- Carefully remove tray, empty,
wash out and replace
- Remove tray, clean metal contacts,
see Section 17.10
- Clean according to Section 18
- Carry out cleaning again, but this
time do not add any cleaning
tablet
- Descale as described in Section
19
- Carry out descaling again, but this
time only with water and without
descaler
- Call Customer Service
Remedy
- Set grinder to coarser level (Fig1)
- Perform one or two wash operations.
If the result is not better, clean
the appliance (see Section 18).
- Deliver a cup of coffee
- See Section 17.8
- Carry out cappuccino cleaning
(see Section 18)
18.06.04 / Rev D / Maks 4 / PPB
(Fig2)
(Fig2)
(Fig8)