Publicité
Les langues disponibles
Les langues disponibles
10. Stones and other objects that m ay cause serious injuries or m aterial dam age m ay be thrown off in the course of w ork
w ith the scythe.
11. Do not approach the moving parts if the machine is in operation (in the area of cutting devices)
12. Any stones, branches and other solids articles must be removed from the w ork area before using the machine.
13. Particular attention is required at extending the cutting string if the coil is employed. The correct w orking position must be taken
after re-adjusting the machine before it is put in operation again.
14. Do not use metal cutting coils.
15. Make sure that the machine continues operation for another five seconds after the sw itch is released.
Operation
Machine Start up # 94032
Fig. 37
Fig. 38
Fig. 34
Fig. 35
Fig. 36
Put the sw itch in position I.
Put the choke lever in position Start.
Press the primary pump 3-5 times.
•
Press the release button and accelerate
•
In this position, push the half-gas lock in (cold condition).
•
Start up the machine by controlled pulling the starter and
the tow rope.
•
Proceeding in the described w ay, press the machine dow n
w ith the other hand.
•
The choke may be released as soon as the machine is
running.
•
The machine is ready for operation.
19
Publicité
