Güde GFS 1100 B Traduction Du Mode D'emploi D'origine page 13

Every effort is made to improve our products continuously. Therefore, technical data and figures
are subject to change!
A.V. 2 Reissues, even if partial, should be authorised. Technical changes reserved.
© Güde GmbH & Co. KG - 2006
Unit
A lightw eight and easy to handle engine scythe. Perfect for additional care of vegetation. Enables easy mow ing of mid-grow n grass
and grass areas. Easy operation.
Scope of Delivery
GFS 1100 B # 94032
Fig. 3
Guarantee
The guarantee solely covers inadequacies caused by material defect or manufacturing defect.
Original payment voucher w ith the sales date needs to be submitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised use such as appliance overloading, use of violence, damage as a result of any
unauthorised interference or caused by foreign items. Failing to follow the operating and assembly instructions and common w ear are
also not included in the guarantee.
General Safety Instructions
Prior to the initial use of the unit, the operating instructions should be read completely. If in doubt w ith regard to connection and
operation of the unit, consult the manufacturer (servicing department).
FOLLOW THE INSTRUCTIONS BELOW CAREFULLY IN ORDER TO SECURE A HIGH DEGREE OF SAFETY:
CAUTION!
All the instructions and safety, assembly and operating instructions contained in the manual shall be observed to assure that the
engine scythe is operated safely. Anybody operating this engine or performing its maintenance should make himself/herself familiar
w ith the manual and get informed of potential hazards. Keep children, the ill and handicapped outside the reach. If children stay in the
w orking area of the machine, they should be looked after carefully. Observe regional and local safety regulations applicable in your
area and any provisions on labour safety and health protection at w ork.
The manufacturer shall not be held liable for any material or personal damage resulting from any unauthorised modification of the
machine.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Disc
11. Coil protection
12. String coil
13. Shoulder straps system
14. retaining hook
15. hexagon w rench
16. screw driver
17. Ignition plug replacement w rench
18. Ignition plug replacement w rench
19. clamping flange
20. disc safety nut
21. nut
22. locking screw and split w ashers
23. spacing w asher
24. gas lever
25. operating sw itch
26. half-gas lock
27. unlocking
13
Handle
Tank
Engine case
Starter and tow rope
Air filter
Holding screw
Control handle
Tube
Blade protection
socket