Clutch Control; Check The Level - Betamotor XTRAINER 250 2T EUROPA Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 173
4
2
EN

CLUTCH CONTROL

1

CHECK THE LEVEL

To check the oil level in the clutch pump,
first remove cover 2.
Remove the two screws 1 and take off
cover 1 together with the rubber bellows.
With the clutch pump in a horizontal posi-
tion, the level of the oil should be 5 mm
below the upper rim.
In the case where the level is lower than
specified top up.
Use the liquid indicated on page 16 in
the "Recommended lubricants and liquids"
table.
- with the eyes, rinse immediately with
plenty of water and seek medical advice.
- with skin, immediately clean contaminat-
ed areas with soap and water. Change
clothing that is contaminated with liquid.
If liquid is swallowed, contact a doctor
immediately.
62
WARNING:
The clutch fluid is extremely corro-
sive. Take care not to spill it on the
paintwork.
Wear appropriate protective cloth-
ing and protection gloves.
Keep coolant out of reach of children
WARNING:
Avoid any direct con-
tact of the liquid with skin, eyes or
clothing. If this happens:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Xtrainer 300 2t europaXtrainer 250 2tXtrainer 300 2tXtrainer 250 2022Xtrainer 300 2022

Table des Matières