Betamotor XTRAINER 250 2T EUROPA Mode D'emploi page 111

3.2.1 LCD GENERAL CHARACTERISTICS
Each information/data is refreshed independently at different rates, depending on
information type and variability of this information.
3.2.2 SPEED
Dashboard computes and displays the motorbike speed on LCD display. Speed
information can be obtained from:
Dedicated digital input for measuring speed sensor frequency.
3.2.2.1 Speed digital input configuration
Configuration parameters for speed input and speed visualization.
Dimensions displayed:
Minimum speed indication:
Speedometer advance:
Wheel parameters:
• Wheel perimeter selectable between 2 values:
• Default wheel perimeter value: (enduro) 2100mm
• 2nd wheel perimeter value: 1811mm
• Pulses per turn:
3.2.2.2 Speed LCD
Speed and speed units are permanently displayed (km/h or mph).
km/h display range: 0 to 199km/h.
mph display range: 0 to 199mph.
Leading zeros suppressed.
Following picture shows LCD displaying speed in km/h and mph:
[km/h or mph]
[5 km/h]
[5 %]
[1 pulses/turn]
25
2
EN