Replacement - Betamotor XTRAINER 250 2T EUROPA Mode D'emploi

4
1
2
EN
WARNING:
Wear appropriate protective cloth-
ing and protection gloves.
Keep coolant out of reach of chil-
dren.
Avoid any direct contact of the cool-
ant with skin, eyes or clothing. If this
happens:
- with the eyes, rinse immediately with
plenty of water and seek medical advice;
- with skin, Immediately clean contaminat-
ed areas with soap and water Change
clothing that is contaminated with cool-
ant.
If coolant is swallowed, contact a doctor
immediately.

REPLACEMENT

Keep the vehicle in vertical position relative
to the ground.
Replacement of the coolant must take place
when the engine is cold.
- Unscrew cap 1.
- Place a container under screw 2.
- Unscrew the screw 2.
- Drain the liquid.
- Tighten screw 2 applying the specific
washer.
50