Betamotor RR 2T 50 Mode D'emploi page 92

2
Maintenance Mileage Setting
EN
Switch from
Press Select button to switch to Mainte-
nance Mileage setting screen.
Press Adjust button to enter Maintenance
Mileage setting.
Press the Select button to choose mainte-
nance mileage ON or OFF.
NOTE: Default: OFF.
If ON is chosen, press Select button to
enter the maintenance mileage setting.
Press the Select button to move the cursor
to the digit that would like to set.
To set the digit press the Select button.
Once programmed press the Adjust but-
ton to return to the main menu.
Note: the limit is set to 5000km.
If OFF is chosen then press the Adjust but-
ton to exit the maintenance mileage setting.
Press Select button to switch the screen
from to
Press the Adjust button to enter the Back-
light Brightness setting
Press the Adjust button to get back to the
main menu.
30
to