Betamotor RR 2T 50 Mode D'emploi page 91

The clock (Hour) setting
The clock (Minute) setting
Distance setup for Stopwatch
EX: You want to set the hour at 14.
Press the Select button to choose the hour
you want to set.
NOTE: Setting range: 0~24 H.
NOTE: The sequent of cursor movement:
Hour>Ten-Digit of Minute>Single
Digit of Minute
EX. Now the setting is changed from 0:00
to 14:00.
Press the Adjust button to enter the minute setting.
EX. To change the setting to 14:05.
Press the Select button to choose the
minute you want to set.
NOTE: Setting range: 0~59 minutes.
EX. Now the minute is changed from
14:00 to 14:05.
Press the Adjust button to get back to
Clock setting screen.
Switch from
Press Select button to switch to Stopwatch
distance setup entering screen.
Press Adjust button to enter the distance
setup for Stopwatch.
Press the Select button to choose auto/
manual stopwatch function.
If Auto is chosen, press the Select button
to exit the stopwatch setting function.
NOTE: Default: AUTO
29
to
2
EN