Select Button Function Instruction - Betamotor RR 2T 50 Mode D'emploi

2
Press the Adjust button to switch from Hour
Meter B back to the main screen.
When the hour meter B is selected, press
and hold the Adjust button for 3 seconds
to reset the Hour meter B.
The main screen.

SELECT BUTTON FUNCTION INSTRUCTION

Press the Select button during main screen
to switch from Clock to Stopwatch.
Press and hold the Select button for 3 sec-
onds to change between 12/24 hour mode.
NOTE: If 24hour mode is chosen, then
the AM/PM symbol will not be displayed.
Press the Select button to switch from
Stopwatch to Speed Record.
Press and hold the Select button for 1
second to reset the Stopwatch.
Press the Select button to switch from
Speed Record back to main screen.
Press and hold the Select button for 3
seconds to reset the Speed Record.
NOTE: If Engine Oil Light goes up, reset
the Engine Oil Light in this screen to re-
calculate the mileage.
NOTE: Average speed and the Max
speed display in the 3 seconds rotation.
The main screen.
EN
27