Air Filter - Betamotor RR 2T 50 Mode D'emploi

4
EN

AIR FILTER

To access the filter:
- Remove the saddle (page 58).
- Remove the filter box cover
- Remove screw 1 and pull out the filter
Sponge filter
- wash the filter with soap and cold water
- Dry the filter
- Wet the filter with filter oil, removing any
excess oil so that there is no dripping; we
suggest to grease the side that touches
the filter box.
Paper filter
- Blow the filter with compressed air.
1
- If necessary also clean the interior of the
filter box
- Reassemble proceeding in the reverse
order.
NOTE:
If the filter is damaged, replace it imme-
diately.
WARNING:
After every intervention, check that
nothing has been left inside the filter
box.
Clean the filter every time the
vehicle is used cross-country.
48