Description Of The Product; Elements Of The Complete Installation - Erreka VIVO-M101 Manuel De L'installateur

DESCRIPTION OF THE PRODUCT

1

ELEMENTS OF THE COMPLETE INSTALLATION

INSTALLATION COMPONENTS:
1
Operator (VULCAN)
2
Flashing light
3
Gate
4
Exterior photocells
5
Key switch (key device)
6
Wall button (key device)
7
Control board
8
Connections box
9
Underground electrical installation
10 Interior photocells
11 Electrolock
12 External closing stopper
13 Reception antenna
ELECTRICAL CABLING:
Element
A: Main power supply
B: Flashing light
C: Photocells
D: Key switch
E: Operator / Limit switches
F: Antenna
Fig. 1 Elements of the complete installation (swing gate)

The safe and correct operation of the
installation is the responsibility of the installer.

The closing stopper (12) is an essential element.

If the photocells (4) and (10) or the VUS operator are not
installed, the Man Present mode must be programmed in
the control board in order to comply with legislation
(DIP10 ON and DIP 4 OFF).
Nº wires x section
2
3x1.5 mm
2
2x0.5 mm
2
2x0.5 mm
2
2x0.5 mm
2 2
4x0.75mm / 4x0.5mm
k
Coaxial cable 50 (RG-58/U)

The facility is operated by way of the button (6) or
wall key (5), or using the transmitter.
7
Maximum length
30m
20m
30m
25m
20m
5m
Control board VIVO-M101(M)
English
E171A
39